CHARNWOOD B250 10" PREMIUM WOODWORKING BANDSAW WITH 6" DEPTH OF CUT. Premium Grade 10 Woodworking Bandsaw. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this size and price, of 150mm 6? The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel.The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B250 has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely.
The same setup is then repeated beneath the table. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw.Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied. Supplied with 3/8 x 6tpi blade, rip fence, mitre fence, work light, floor stand, 1.8m power cable and UK 3 pin plug. This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.
Maximum cutting depth 150mm 6? Cutting width with fence 105mm Left / 120mm Right. Table size 360mm x 320mm.Mitre Guide T-Slot 8.5mm / 14mm. Cutting speeds 400 & 800m/min. Dimensions (WxDxH) 670mm x 530mm x 1450mm. Assembly Time Required 45 Minutes. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws".
The seller is "taylorsmirfield" and is located in this country: GB. This item can be shipped to United Kingdom.